Juniper ACX2000

family inet {
address 10.255.102.128/32;
}
family iso {
address 49.0001.1720.1600.1010.00;
}
}
}
user@R1# show protocols
mpls {
interface all;
interface em0.0 {
disable;
}
}
isis {
spf-options delay 1000;
backup-spf-options {
remote-backup-calculation;
node-link-degradation;
}
interface ge-1/0/0.1;
interface ge-1/5/0.12; {
link-protection;
}
interface all {
node-link-protection;
level 2 metric 10;
}
interface em0.0 {
disable;
}
interface lo0.12 {
passive;
}
}
ldp {
auto-targeted-session {
teardown-delay 60;
maximum-sessions 20;
}
deaggregate;
interface all;
interface em0.0 {
disable;
}
}
user@R1# show policy-options
policy-options {
policy-statement ecmp {
term 1 {
then {
load-balance per-packet;
}
}
575Copyright © 2017, Juniper Networks, Inc.
Chapter 18: Configuring Routing Protocols