Juniper ACX2000

Configured conditions:
Condition primary (static), event: Existence of a route in a specific routing
table
Dependent routes:
10.41.0.0/24, generation 8
192.168.0.104/32, generation 8
Condition standby (static), event: Existence of a route in a specific routing
table
Dependent routes:
None
Condition tables:
Table mpls.0, generation 0, dependencies 0, If-route-exists conditions: primary
(static) standby (static)
Table l3vpn.inet.0, generation 12, dependencies 2
user@PE2> show policy conditions detail
Configured conditions:
Condition primary (static), event: Existence of a route in a specific routing
table
Dependent routes:
10.41.0.0/24, generation 18
Condition standby (static), event: Existence of a route in a specific routing
table
Dependent routes:
10.41.0.0/24, generation 18
Condition tables:
Table mpls.0, generation 0, dependencies 0, If-route-exists conditions: primary
(static) standby (static)
Table l3vpn.inet.0, generation 367, dependencies 2
Related
Documentation
• Understanding Pseudowire Redundancy Mobile Backhaul Scenarios on page 623
649Copyright © 2017, Juniper Networks, Inc.
Chapter 20: Configuring MPLS and Pseudowires