Juniper ACX2000 Configuration Guide

identifier. “No operation” means that the VLAN tags of the received packet are not
translated for the specified input logical interface.
Table 48: Statement Usage and Input Rewrite Operations for VLAN Identifiers for a Bridge
Domain
VLAN Configurations for Bridge Domain
VLAN Identifier of
Logical Interface vlan-id 200vlan-id none
push 200No operationnone
No operationpop 200200
swap 1000 to 200pop 10001000
pop 2000, swap 300
to 200
pop 2000, pop 300vlan-tags outer 2000
inner 300
pop 100, swap 400
to 200
pop 100, pop 400vlan-tags outer 100
inner 400
––vlan-id-range 10-100
Table 49 on page 758 shows specific examples of how the VLAN tags for packets sent
from the bridge domain are processed and translated, depending on your configuration.
“–” means that the statement is not supported for the specified logical interface VLAN
identifier. “No operation” means that the VLAN tags of the outbound packet are not
translated for the specified output logical interface.
Table 49: Statement Usage and Output Rewrite Operations for VLAN Identifiers for a Bridge
Domain
VLAN Configurations for Bridge Domain
VLAN Identifier of
Logical Interface vlan-id 200vlan-id none
pop 200no operationnone
No operationpush 200200
swap 200 to 1000push 10001000
swap 200 to 300,
push 2000
push 2000, push 300vlan-tags outer 2000
inner 300
swap 200 to 400,
push 100
push 100, push 400vlan-tags outer 100 inner 400
––vlan-id-range 10-100
Copyright © 2017, Juniper Networks, Inc.758
ACX Series Universal Access Router Configuration Guide

Juniper ACX2000 Specifications

General

Brand	Juniper
Model	ACX2000
Category	Network Router
Language	English