Results
From configuration mode, confirm your configuration by entering the show command. If
the output does not display the intended configuration, repeat the configuration
instructions in this example to correct it.
[edit class-of-service]
user@host# show
traffic-control-profiles {
profile-1 {
atm-service rtvbr;
peak-rate 5k;
sustained-rate 3k;
max-burst-size 400;
}
profile-2 {
atm-service cbr;
peak-rate 1k;
}
}
interfaces {
at-0/0/16 {
unit 101 {
output-traffic-control-profile profile-1;
}
}
}
traceoptions {
file cos size 1000000000;
flag all;
}
[edit interfaces]
user@host# show
at-0/0/16 {
per-unit-scheduler;
}
}
After you have completed the configuration, enter the commit command from
configuration mode.
Related
Documentation
Understanding CoS on ATM IMA Pseudowire Interfaces Overview on page 895•
• Configuring Shaping on an ATM IMA Pseudowire on page 901
• Example: Configuring Fixed Classification on an ATM IMA Pseudowire on page 898
• Example: Configuring Policing on an ATM IMA Pseudowire on page 915
Copyright © 2017, Juniper Networks, Inc.906
ACX Series Universal Access Router Configuration Guide
To Next Page
Loading...
Need help?
General
