Juniper ACX2000

atm-policer policer-1 {
logical-interface-policer;
atm-service rtvbr;
peak-rate 2k;
sustained-rate 1800;
max-burst-size 400;
cdvt 900001;
policing-action discard-tag;
}
atm-policer policer-2 {
logical-interface-policer;
atm-service nrtvbr;
peak-rate 1800;
sustained-rate 1500;
max-burst-size 300;
cdvt 999991;
policing-action discard;
}
atm-policer policer-3 {
logical-interface-policer;
atm-service cbr;
peak-rate 2k;
cdvt 800001;
policing-action count;
}
[edit interfaces]
user@host# show
at-0/0/16 {
unit 0 {
atm-policer {
input-atm-policer policer-1;
}
family ccc;
}
unit 1 {
atm-policer {
input-atm-policer policer-2;
}
family ccc;
}
unit 2 {
atm-policer {
input-atm-policer policer-3;
}
family ccc;
}
}
After you have completed the configuration, enter the commit command from
configuration mode.
Related
Documentation
Understanding CoS on ATM IMA Pseudowire Interfaces Overview on page 895•
• Configuring Policing on an ATM IMA Pseudowire on page 912
• Example: Configuring Fixed Classification on an ATM IMA Pseudowire on page 898
• Example: Configuring Shaping on an ATM IMA Pseudowire on page 902
919Copyright © 2017, Juniper Networks, Inc.
Chapter 27: Configuring Class of Service