2.21 Setting External Mixer
2-1001
2
SCPI Device Message Details
[:SENSe]:MIXer:PS[:Center]?
PS Function Query
Function
This command queries the state of PS function, which reverses the
frequency polarity at the center frequency when using High Performance
Waveguide Mixer.
Query
[:SENSe]:MIXer:PS[:Center]?
Response
<status>
Parameter
<status>
PS function
1
PS function is enabled.
0
PS function is disabled.
Details
This function is available when Option 044/045 is installed for MS2830A.
This function is available when Option 044/046 is installed for MS2840A.
Example of Use
To query the state of PS function, which reverses the frequency polarity
at the center frequency.
MIX:PS?
> 1
To Next Page
Loading...
