Anritsu MS2840A - DISP:SPUR:SEGM;DISP:SPUR:SEGM?

Chapter
４
Native Device Message Details
4-75
4
Native Device Message Details
DISP:SPUR:SEGM/DISP:SPUR:SEGM?
Displayed Segment
Function
This command specifies the segment to display the trace data in.
Command
DISP:SPUR:SEGM integer
Query
DISP:SPUR:SEGM?
Response
integer
Parameter
integer
Segment number
Range 1 to 20
Resolution 1
Details
A segment which is set to Off cannot be specified.
This command is not available during measurement and when Displayed
Segment Mode is Auto.
Example of Use
To specify 2 to the segment to display the trace data in.
DISP:SPUR:SEG 2
DISP:SPUR:SEG?
> 2