Anritsu MS2840A - ADJCARRIERSPAC;ADJCARRIERSPAC?

Chapter
４
Native Device Message Details
4-13
4
Native Device Message Details
ADJCARRIERSPAC/ADJCARRIERSPAC?
ACP Carrier Spacing
Function
This command sets the frequency interval among carriers for ACP
measurement.
Command
ADJCARRIERSPAC freq
Query
ADJCARRIERSPAC?
Response
freq
Suffix code None. Value is returned in Hz units.
Parameter
freq
Frequency interval among carriers
Range 0 to 1 GHz
Resolution 1 Hz
Suffix Code HZ,KHZ,KZ,MHZ,MZ,GHZ,GZ
Hz is used when omitted.
Details
This command is not available when ACP Reference is set to Span Total.
Example of Use
To set the frequency interval among carriers to 12.3 MHz.
ADJCARRIERSPAC 12300000
ADJCARRIERSPAC?
> 12300000