Anritsu MS2840A - SEM:OFFS:LIST:BAND:VID:AUTO;SEM:OFFS:LIST:BAND:VID:AUTO?

Chapter
４
Native Device Message Details
4-234
Example of Use
To set the video bandwidth of the offset.
SEM:OFFS:LIST:BAND:VID
3KHZ,3KHZ,3KHZ,10KHZ,10KHZ,10KHZ,3KHZ,3KHZ,3KHZ,10KHZ,10
KHZ,10KHZ
SEM:OFFS:LIST:BAND:VID?
>
3000,3000,3000,10000,10000,10000,3000,3000,3000,10000,10
000,10000
SEM:OFFS:LIST:BAND:VID:AUTO/SEM:OFFS:LIST:BAND:VID:AUTO?
Spectrum Emission Mask Offset Video Bandwidth Auto/Manual
Function
This command sets the video bandwidth (VBW) of the offset for Spectrum
Emission Mask measurement.
Command
SEM:OFFS:LIST:BAND:VID:AUTO
switch_1_com[,switch_2_com[,switch_3_com[,switch_4_com[,
switch_5_com[,switch_6_com[,switch_7_com[,switch_8_com[,
switch_9_com[,switch_10_com[,switch_11_com[,switch_12_co
m]]]]]]]]]]]
Query
SEM:OFFS:LIST:BAND:VID:AUTO?
Response
switch_1_res,switch_2_res,switch_3_res,switch_4_res,swit
ch_5_res,switch_6_res,switch_7_res,switch_8_res,switch_9
_res,switch_10_res,switch_11_res,switch_12_res
Parameter
switch_n_com
Automatic On/Off of Offset-n
ON|1
Enables the automatic setting function.
OFF|0
Disables the automatic setting function.
switch_n_res
Automatic On/Off of Offset-n
1
Enables the automatic setting function.
0
Disables the automatic setting function.