Anritsu MS2840A - [:SENSe]:FREQuency:BAND:MODE:STATe?

2.1 Frequency/Span
2-51
2
SCPI Device Message Details
[:SENSe]:FREQuency:BAND:MODE:STATe?
Frequency Band Mode Status Query
Function
This command queries the Spurious Mode status of the frequency band
with the current measurement conditions.
Query
[:SENSe]:FREQuency:BAND:MODE:STATe?
Response
<status>
Parameter
<status>
Spurious Mode status of frequency band
1
Includes the frequency band in Spurious Mode.
0
Does not include the frequency band in Spurious
Mode.
Details
This command is available for MS2830A and MS2840A.
When Spurious is selected for the Frequency Band Mode, the frequency
band of Spurious Mode is included if the frequency range is 3.5 GHz ≤ f.
Example of Use
To query the Spurious Mode status of the frequency band with the
current measurement conditions.
FREQ:BAND:MODE:STAT?
> 1