Anritsu MS2840A - :MEASure:CHPower:CHPower?; :MEASure:CHPower:DENSity?; :CALCulate:CHPower:MARKer:AOFF

2.11 Channel Power
2-499
2
SCPI Device Message Details
:MEASure:CHPower:CHPower?
Channel Power Measure
Function
This command performs the measurement for Channel Power and
outputs the total In Band power.
It achieves the same result as when commands are sent in the order of
:CONFigure:CHPower
:INITiate:CHPower
:FETCh:CHPower:CHPower?
:MEASure:CHPower:DENSity?
Channel Power Measure
Function
This command performs the measurement for Channel Power and
outputs the total In Band power density.
It achieves the same result as when commands are sent in the order of
:CONFigure:CHPower
:INITiate:CHPower
:FETCh:CHPower:DENSity?
:CALCulate:CHPower:MARKer:AOFF
All Marker Off
Function
This command sets all the markers to Off.
Refer to
:CALCulate:MARKer:AOFF.
Related command
This command has the same function as the following commands.
:CALCulate:MARKer:AOFF
:CALCulate:ACPower:MARKer:AOFF
:CALCulate:OBWidth:MARKer:AOFF
:CALCulate:BPOWer|:TXPower:MARKer:AOFF