Anritsu MS2840A - [:SENSe]:SPURious[:RANGe][:LIST]:PEAK:RESolution|:EXCursion <rel_ampl_1>,<rel_ampl_2>,<rel_ampl_3>,<rel_ampl_4>,<rel_ampl_5>,<rel_ampl_6>,<rel_ampl_7>,<rel_ampl_8>,<rel_ampl_9>,<rel_ampl_10>,<rel_ampl_11>,<rel_ampl_12>,<rel_ampl_13>,<rel_ampl_14>,<re...

Chapter 2 SCPI Device Message Detail
2-778
[:SENSe]:SPURious[:RANGe][:LIST]:PEAK:RESolution|:EXCursion
<rel_ampl_1>,<rel_ampl_2>,<rel_ampl_3>,<rel_ampl_4>,<rel_ampl_5>,<rel_
ampl_6>,<rel_ampl_7>,<rel_ampl_8>,<rel_ampl_9>,<rel_ampl_10>,<rel_am
pl_11>,<rel_ampl_12>,<rel_ampl_13>,<rel_ampl_14>,<rel_ampl_15>,<rel_a
mpl_16>,<rel_ampl_17>,<rel_ampl_18>,<rel_ampl_19>,<rel_ampl_20>
Spurious Emission Search Resolution
Function
This command sets the spurious search resolution when Result Type is
set to Peaks.
Command
[:SENSe]:SPURious[:RANGe][:LIST]:PEAK:RESolution|:EXCurs
ion <rel_ampl_n>
Parameter
<rel_ampl_n>
Spurious search resolution
Range 0.001 to 50.00 dB
Resolution 0.001 dB
Suffix Code DB
Default 6 dB
Example of Use
To set the spurious search resolution.
SPUR:PEAK:RES 6,6,6,6,6,10,10,10,6,6,6,6,6,6,6,6,6,6,6,6