Anritsu MS2840A - [:SENSe]:MIXer:CALibration

Chapter 2 SCPI Device Message Detail
2-1006
[:SENSe]:MIXer:CALibration
External Mixer Calibration
Function
This command executes the External Mixer Calibration function
Command
[:SENSe]:MIXer:CALibration
Details
This function is available only when MS2830A is installed with Option
044/045 and combined with High Performance Waveguide Mixer.
This function is available only when MS2840A is installed with Option
044/046 and combined with High Performance Waveguide Mixer.
This function cannot be performed when Measure function is On.
This function cannot be performed when Trigger is On.
This function cannot be performed when Gate is On.
Example of Use
To execute the External Mixer Calibration function
MIX:CAL