Chapter 2 SCPI Device Message Details
2-282
:TRIGger[:SEQuence]:EXTernal[1]:DELay?
Trigger Delay Query
Function
This command queries the delay from the trigger occurrence point to
sweep start.
Query
:TRIGger[:SEQuence]:EXTernal[1]:DELay?
Response
<time>
Parameter
<time>
Delay time to the time when the gate starts.
Range –1 to 1 s
Resolution 20 ns
Suffix code None. Value is returned in S units.
Example of Use
To query the trigger delay time.
TRIG:EXT:DEL?
> 0.02000000
Related command
This command has the same function as the following commands.
:TRIGger[:SEQuence]:WIF|:RFBurst:DELay?
:TRIGger[:SEQuence]:VIDeo:DELay?
:TRIGger[:SEQuence]:WIF|:RFBurst:DELay <time>
Trigger Delay
Function
This command sets the delay time from generating the trigger to starting
the sweep. Refer to
:TRIGger[:SEQuence]:EXTernal[1]:DELay
Related command
This command has the same function as the following commands.
:TRIGger[:SEQuence]:EXTernal[1]:DELay
:TRIGger[:SEQuence]:VIDeo:DELay
To Next Page
Loading...
