Anritsu MS2840A - :TRIGger[:SEQuence][:STATe]?; :TRIGger[:SEQuence]:SOURce EXTernal[1]|IMMediate|WIF|RFBurst|VIDeo|SG|BBIF|FRAMe

2.7 Sweep/Trigger/Gate
2-271
2
SCPI Device Message Details
:TRIGger[:SEQuence][:STATe]?
Trigger Switch Query
Function
This command queries the On/Off state of the trigger sweep.
Query
:TRIGger[:SEQuence][:STATe]?
Response
<switch>
Parameter
<switch>
Trigger sweep On/Off
0
Does not perform trigger sweep.
1
Performs trigger sweep.
Example of Use
To query the On/Off state of the trigger sweep.
TRIG?
> 0
:TRIGger[:SEQuence]:SOURce
EXTernal[1]|IMMediate|WIF|RFBurst|VIDeo|SG|BBIF|FRAMe
Trigger Source
Function
This command selects trigger source.
Command
:TRIGger[:SEQuence]:SOURce <source>
Parameter
<source>
Trigger signal source
[MS269xA]
EXTernal[1]
External input (External)
IMMediate
Free run
WIF|RFBurst
Wide bandwidth IF detection (Wide IF Video)
VIDeo
Video detection (Video)
SG
SG Marker
BBIF
Baseband Interface (BBIF)