Anritsu MS2840A - :DISPlay:SPURious:STABle RESult|RANGe; :DISPlay:SPURious:STABle?

Chapter 2 SCPI Device Message Detail
2-726
Example of Use
To query the On/Off state of the summary page auto numbering.
DISP:SPUR:SEG:AUTO?
> 1
:DISPlay:SPURious:STABle RESult|RANGe
Displayed Summary Table
Function
This command sets the content to be displayed in the Summary Table.
Command
:DISPlay:SPURious:STABle <mode>
Parameter
<mode>
The contents displayed for Summary Table.
RESult
Measurement result for each segment (Default)
RANGe
Frequency range for each segment
Example of Use
To display the measurement result in the Summary Table
DISP:SPUR:STAB RES
:DISPlay:SPURious:STABle?
Displayed Summary Table Query
Function
This command queries the content setting in the Summary Table.
Query
:DISPlay:SPURious:STABle?
Response
<mode>
Parameter
<mode>
The contents displayed for Summary Table.
RES
Measurement result for each segment
RANG
Frequency range for each segment