Anritsu MS2840A - [:SENSe]:TOI:ZSPan:SWEep:TIME:AUTO ON|OFF|1|0

Chapter 2 SCPI Device Message Detail
2-840
[:SENSe]:TOI:ZSPan:SWEep:TIME:AUTO ON|OFF|1|0
TOI Zero Span Measurement Sweep Time Auto/Manual
Function
This command turns on and off the automatic setting of the sweep time
for the Zero Span Measurement in the TOI measurement.
Command
[:SENSe]:TOI:ZSPan:SWEep:TIME:AUTO <switch>
Parameter
<switch>
Automatic setting of the sweep time for the Zero
Span Measurement in the TOI measurement.
ON|1
Turns on the automatic setting of the sweep time
for the Zero Span Measurement in the TOI
measurement. (Default)
OFF|0
Turns off the automatic setting of the sweep
time for the Zero Span Measurement in the TOI
measurement.
Example of Use
To turn on the automatic setting of the sweep time for the Zero Span
Measurement in the TOI measurement.
TOI:ZSP:SWE:TIME:AUTO ON