Anritsu MS2840A - :CALCulate:LLINe[1]|2|3|4|5|6:TRACe <trace>

Chapter 2 SCPI Device Message Details
2-222
:CALCulate:LLINe[1]|2|3|4|5|6:TRACe <trace>
Test Trace
Function
This command sets the evaluation target trace of the current Limit Line.
Command
:CALCulate:LLINe[1]|2|3|4|5|6:TRACe <Trace>
Parameter
<Trace>
Trace to be evaluated
A
Trace A (Default)
B
Trace B
C
Trace C
D
Trace D
E
Trace E
F
Trace F
When omitted
A
Example of Use
To set Trace C of Limit Line3 as an evaluation target.
CALC:LLIN3:TRAC C