Anritsu MS2840A - :CALCulate: ACPower:CARRier[1]:COUNt <integer>; [:SENSe]:ACPower:CARRier[1]:COUNt?

2.9 ACP
2-371
2
SCPI Device Message Details
:CALCulate: ACPower:CARRier[1]:COUNt <integer>
Adjacent Channel Power Carrier Number
Function
This command sets the carrier number for Adjacent Channel Power
measurement.
Refer to
[:SENSe]:ACPower:CARRier[1]:COUNt.
Related command
This command has the same function as the following command.
[:SENSe]:ACPower:CARRier[1]:COUNt
[:SENSe]:ACPower:CARRier[1]:COUNt?
Adjacent Channel Power Carrier Number Query
Function
This command queries the carrier number for Adjacent Channel Power
measurement.
Query
[:SENSe]:ACPower:CARRier[1]:COUNt?
Response
<integer>
Parameter
<integer>
Carrier number
Range 1 to 12
Resolution 1
Suffix code None
Details
The command is not available when ACP Reference is set to the
following:
•
Span Total
Example of Use
To query the carrier number.
ACP:CARR:COUN?
> 12