Anritsu MS2840A - [:SENSe]:SPURious[:RANGe][:LIST]:SWEep:PAUSe ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0, ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0, ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0, ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|O...

2.14 Spurious Emission Measurement Function
2-759
2
SCPI Device Message Details
[:SENSe]:SPURious[:RANGe][:LIST]:SWEep:PAUSe
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,
ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0,ON|OFF|1|0
Pause before Sweep
Function
This command configures the setting to pause before sweep of each
segment.
Command
[:SENSe]:SPURious[:RANGe][:LIST]:SWEep:PAUSe <switch_n>
Parameter
<switch_n>
Pause before sweep On/Off
ON|1
Pause before sweep.
OFF|0
Not pause before sweep.
Default Off
Details
When it is set to On, the dialog box is displayed before measuring the
segment, and the measurement pauses.
The measurement does not pause during remote operation. Also, when it
has switched to remote operation during pause, the measurement
restarts.
Example of Use
To configure settings to pause before sweep of each segment.
SPUR:SWE:PAUS
ON,ON,ON,OFF,OFF,ON,ON,ON,ON,OFF,OFF,ON,ON,ON,ON,OFF,OFF
,ON,ON,ON