Anritsu MS2840A - :CALCulate:MARKer:TRCKing[:STATe] OFF|ON|0|1; :CALCulate:MARKer:TRCKing[:STATe]?

2.4 Marker
2-159
2
SCPI Device Message Details
:CALCulate:MARKer:TRCKing[:STATe] OFF|ON|0|1
Marker Tracking
Function
This command sets the Marker tracking function to On/Off.
Command
:CALCulate:MARKer:TRCKing[:STATe] <switch>
Parameter
<switch>
Marker tracking function On/Off
ON|1
Marker tracking On
OFF|0
Marker tracking Off
Details
Conducts sweep after adjusting the center frequency of trace to that of
the active marker frequency.
Example of Use
To enable Marker tracking
CALC:MARK:TRCK ON
:CALCulate:MARKer:TRCKing[:STATe]?
Marker Tracking Query
Function
This command queries the Marker tracking function to On/Off.
Query
:CALCulate:MARKer:TRCKing[:STATe]?
Response
<switch>
Parameter
<switch>
Marker tracking function On/Off
1
Marker tracking function On
0
Marker tracking function Off
Example of Use
To query the marker tracking setting
CALC:MARK:TRCK?
> 1