Anritsu MS2840A - 3.9 Sweep;Trigger;Gate Settings

Chapter
３
Native Device Message List
3-18
3.9 Sweep/Trigger/Gate Settings
Device messages for setting sweep/trigger/gate are shown in Table 3.9-1.
Table 3.9-1 Sweep/trigger/gate setting messages
Function Command Query Response Remarks
Single Sweep
SNGLS
---
---
(Asynchronous sweep)
SWP SWP? status
status: Sweep status
TS
---
---
Continuous Sweep
CONTS --- ---
(Asynchronous sweep)
Average Sweep
TSAVG
---
---
Average Sweep (Linear Average)
TSLINAVG --- ---
Max Hold Sweep
TSMAXHOLD
---
---
Min Hold Sweep
TSMINHOLD --- ---
Sweep Restart
SWSTART
---
---
Sweep Stop
SWSTOP --- ---
Sweep Time
ST time
ST? time
time: Time
ST AUTO
Auto Sweep Time Mode
STMODE mode STMODE? mode
mode:
= NORMAL | FAST
Auto Sweep Type Select Rules
SWE:RUL rules SWE:RUL? rules
rules: Switching rules
= DRAN | SPE | OSW | PSW
| PFFT
Sweep Type Select Rul
es FFT
Width
SWE:RUL:FFT:WIDT freq SWE:RUL:FFT:WIDT? freq
Sweep Type Select Rules Real
FFT Width Query
--- SWE:RUL:FFT:RWID? freq
Sweep Type Select Rules Real
Type Query
--- SWE:RUL:RTYP? type
type:
Sweep mode
= SWE | FFT