Anritsu MS2840A - [:SENSe]:SPURious:TDOMain[:RANGe][:LIST]:SWEep:TIME?

Chapter 2 SCPI Device Message Detail
2-792
[:SENSe]:SPURious:TDOMain[:RANGe][:LIST]:SWEep:TIME?
Spurious Emission Time Domain Sweep Time Query
Function
This command queries the sweep time in Time Domain Setup.
Query
[:SENSe]:SPURious:TDOMain[:RANGe][:LIST]:SWEep:TIME?
Response
<seconds_n>
Parameter
<seconds_n>
Sweep time
Range 1
µ
s to 1000 s
Suffix code None. Value is returned in S units.
Example of Use
To query the sweep time in Time Domain Setup.
SPUR:TDOM:SWE:TIME?
>
0.100000,0.100000,0.100000,0.100000,0.100000,0.100000,0.
100000,0.100000,0.100000,0.100000,0.200000,0.300000,0.10
0000,0.100000,0.100000,0.100000,0.100000,0.100000,0.1000
00,0.100000