Anritsu MS2840A - :DISPlay:SEMask:ANNotation:TITLe:DATA <string>

Chapter 2 SCPI Device Message Details
2-690
:DISPlay:SEMask:ANNotation:TITLe:DATA <string>
Title Entry
Function
This command registers the title character string.
Command
:DISPlay:SEMask:ANNotation:TITLe:DATA <string>
Parameter
<string>
Character string within 32 characters enclosed
by double quotation marks (" ") or single
quotation marks (′ ′).
Example of Use
To set the title character string.
DISP:SEM:ANN:TITL:DATA ′SPECTRUM ANALYZER′
Related Command
This command has the same function as the following commands.
:DISPlay:ANNotation:TITLe:DATA
:DISPlay:ACPower:ANNotation:TITLe:DATA
:DISPlay:CHPower:ANNotation:TITLe:DATA
:DISPlay:OBWidth:ANNotation:TITLe:DATA
:DISPlay:BPOWer|:TXPower:ANNotation:TITLe:DATA