Anritsu MS2840A - [:SENSe]:CHPower[:STATe]?; :CALCulate:CHPower[:STATe]?

2.11 Channel Power
2-481
2
SCPI Device Message Details
[:SENSe]:CHPower[:STATe]?
Measure Channel Power Query
Function
This command queries the On/Off state of the Channel Power
measurement.
Command
[:SENSe]:CHPower[:STATe]?
Parameter
<switch>
CHP measurement On/Off
1
On
0
Off
Example of Use
To query the On/Off state of the CHP measurement.
CHP?
> 1
Related command
This command has the same function as the following command.
:CALCulate:CHPower[:STATe]?
:CALCulate:CHPower[:STATe]?
Measure Channel Power Query
Function
This command queries the Channel Power measurement On/Off state.
Refer to
[:SENSe]:CHPower[:STATe]?.
Related command
This command has the same function as the following command.
[:SENSe]:CHPower[:STATe]?