Anritsu MS2840A - [:SENSe]:OBWidth:BANDwidth:VIDeo:AUTO OFF|ON|0|1; [:SENSe]:OBWidth:BANDwidth:VIDeo:AUTO?

Chapter 2 SCPI Device Message Details
2-566
[:SENSe]:OBWidth:BANDwidth:VIDeo:AUTO OFF|ON|0|1
Video Bandwidth Auto/Manual
Function
This command sets the video bandwidth (VBW).
Refer to
[:SENSe]:BANDwidth|:BWIDth:VIDeo:AUTO.
Related command
This command has the same function as the following commands.
[:SENSe]:BANDwidth|:BWIDth:VIDeo:AUTO
[:SENSe]:ACPower:BANDwidth:VIDeo:AUTO
[:SENSe]:CHPower:BANDwidth:VIDeo:AUTO
[:SENSe]:OBWidth:BANDwidth:VIDeo:AUTO?
Video Bandwidth Auto/Manual Query
Function
This command queries whether the resolution bandwidth (RBW) is set to
Auto.
Refer to
[:SENSe]:BANDwidth|:BWIDth:VIDeo:AUTO?.
Related command
This command has the same function as the following commands.
[:SENSe]:BANDwidth|:BWIDth:VIDeo:AUTO?
[:SENSe]:ACPower:BANDwidth:VIDeo:AUTO?
[:SENSe]:CHPower:BANDwidth:VIDeo:AUTO?