2
SCPI Device Message Details
[:SENSe]:ACPower:ADVanced:OFFSet:MODE NORMal|ADVanced
Adjacent Channel Power Offset Mode
Function
This command selects offset mode for Adjacent Channel Power
measurement.
Command
[:SENSe]:ACPower:ADVanced:OFFSet:MODE <mode>
Parameter
<mode>
Offset mode
NORMal
Normal setting
ADVanced
Advanced setting
Default
NORMal
Details
This function can be set when the following trace is active.
•
Adjacent Channel Power
Selecting ADVanced supports addition of the settable Offset, setting of
the channel width for each Offset, and selection of the filter selection.
Example of Use
To set the offset mode to Advanced.
ACP:ADV:OFFS:MODE ADV
To Next Page
Loading...
