Chapter
４
Native Device Message Details
4-35
4
Native Device Message Details
Example of Use
To set the frequency to be switched to the preselector band to 6.0 GHz.
BNDSP NORMAL
BNDSP?
> NORMAL
CAL
Calibration
Function
This command executes calibration.
Command
CAL mode
Parameter
mode
Calibration mode
ALL
Executes all calibrations.
LEVEL
Executes Level CAL.
LOLEAK_SUPPRESS
Executes local leak suppression.
BAND
Executes inband calibration.
Example of Use
To perform all calibrations.
CAL ALL
To Next Page
Loading...
