Chapter 2 SCPI Device Message Details
2-280
:TRIGger[:SEQuence]:WIF|:RFBurst:SLOPe POSitive|NEGative
Trigger Slope
Function
This command sets the detection mode for the trigger (rise/fall).
Refer to
:TRIGger[:SEQuence]:EXTernal[1]:SLOPe
Related command
This command has the same function as the following commands.
:TRIGger[:SEQuence]:EXTernal[1]:SLOPe
:TRIGger[:SEQuence]:VIDeo:SLOPe
:TRIGger[:SEQuence]:WIF|:RFBurst:SLOPe?
Trigger Slope Query
Function
This command queries the detection mode for the trigger (rise/fall).
Refer to
:TRIGger[:SEQuence]:EXTernal[1]:SLOPe?
Related command
This command has the same function as the following commands.
:TRIGger[:SEQuence]:EXTernal[1]:SLOPe?
:TRIGger[:SEQuence]:VIDeo:SLOPe?
:TRIGger[:SEQuence]:VIDeo:SLOPe POSitive|NEGative
Trigger Slope
Function
This command sets the detection mode for the trigger (rise/fall).
Refer to
:TRIGger[:SEQuence]:EXTernal[1]:SLOPe
Related command
This command has the same function as the following commands.
:TRIGger[:SEQuence]:EXTernal[1]:SLOPe
:TRIGger[:SEQuence]:WIF|:RFBurst:SLOPe
To Next Page
Loading...
