Chapter 2 SCPI Device Message Details
2-486
[:SENSe]:CHPower:FILTer:TYPE RECT|NYQuist|RNYQuist
Channel Power Filter Type
Function
This command sets filter type for Channel Power measurement.
Command
[:SENSe]:CHPower:FILTer:TYPE <filter>
Parameter
<filter>
Filter type
RECT
Rectangle filter
NYQuist
Nyquist filter
RNYQuist
Root Nyquist filter (Default)
Example of Use
To set the filter type to Nyquist.
CHP:FILT:TYPE NYQ
Related command
This command has the same function as the following commands.
[:SENSe]:CHPower:FILTer
:CALCulate:CHPower:FILTer:TYPE
:CALCulate:CHPower:FILTer:TYPE RECT|NYQuist|RNYQuist
Channel Power Filter Type
Function
This command sets filter type for Channel Power measurement.
Refer to
[:SENSe]:CHPower:FILTer:TYPE.
Related command
This command has the same function as the following commands.
[:SENSe]:CHPower:FILTer
[:SENSe]:CHPower:FILTer:TYPE
To Next Page
Loading...
