Anritsu MS2840A - [:SENSe]:SEMask:OFFSet[1]:LIST:BANDwidth[1]:VIDeo:MODE <method_1>[,<method_2>[,<method_3>[,<method_4>[,<method_5>[,<method_6>[,<method_7>[,<method_8>[,<method_9>[,<method_10>[,<method_11>[,<method_12>]]]]]]]]]]]

Chapter 2 SCPI Device Message Details
2-616
[:SENSe]:SEMask:OFFSet[1]:LIST:BANDwidth[1]:VIDeo:MODE
<method_1>[,<method_2>[,<method_3>[,<method_4>[,<method_5>[,<metho
d_6>[,<method_7>[,<method_8>[,<method_9>[,<method_10>[,<method_11>[
,<method_12>]]]]]]]]]]]
Spectrum Emission Mask Offset Video Bandwidth Mode
Function
This command sets the processing method for the video bandwidth
(VBW) of the offset for Spectrum Emission Mask measurement.
Command
[:SENSe]:SEMask:OFFSet[1]:LIST:BANDwidth[1]:VIDeo:MODE
<method_n>
Parameter
<method_n>
Processing method for VBW of Offset-n
VIDeo
Normal VBW
POWer
Power VBW
Example of Use
To set the processing method for the video bandwidth of the offset.
SEM:OFFS:LIST:BAND:VID:MODE
VID,VID,VID,VID,VID,VID,VID,VID,VID,VID,VID,VID