Anritsu MS2840A - :DISPlay:WINDow[1]:TRACe:Y[:SCALe]:RLEVel:OFFSet:STATe?; [:SENSe]:POWer[:RF]:GAIN[:STATe] ON|OFF|1|0

2.2 Level
2-73
2
SCPI Device Message Details
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:RLEVel:OFFSet:STATe?
Reference Level Offset Mode Query
Function
This command queries the On/Off state of the reference level offset
function.
Command
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:RLEVel:OFFSet:STATe?
Response
<switch>
Parameter
<switch>
Reference level offset function On/Off
1
Reference level offset function is enabled.
0
Reference level offset function is disabled.
Example of Use
To query the On/Off state of the reference level offset function.
DISP:WIND:TRAC:Y:RLEV:OFFS:STAT?
> 1
[:SENSe]:POWer[:RF]:GAIN[:STATe] ON|OFF|1|0
Pre Amp
Function
This command sets Pre Amp to On/Off.
Command
[:SENSe]:POWer[:RF]:GAIN[:STATe] <switch>
Parameter
<switch>
Pre Amp On/Off
ON|1
Pre Amp is set to On.
OFF|0
Pre Amp is set to Off (Default value).