Anritsu MS2840A - :CALCulate:LLINe[1]|2|3|4|5|6:CMODe:AMPLitude FIXed|RELative

Chapter 2 SCPI Device Message Details
2-204
:CALCulate:LLINe[1]|2|3|4|5|6:CMODe:AMPLitude FIXed|RELative
Limits Line Type (Amplitude)
Function
This command sets the vertical axis of Limit Line to represent in
absolute or relative values.
Command
:CALCulate:LLINe[1]|2|3|4|5|6:CMODe:AMPLitude <mode>
Parameter
<mode>
Vertical axis
FIXed/ABSolute
Represent vertical axis in absolute values
RELative
Represent vertical axis in relative values
(Default)
Example of Use
To represent the vertical axis of Limit Line in absolute values.
CALC:LLIN:CMOD:AMPL ABS