Anritsu MS2840A - TRGSOURCE;TRGSOURCE?

Chapter
４
Native Device Message Details
4-345
4
Native Device Message Details
TRGSOURCE/TRGSOURCE?
Trigger Source
Function
This command selects trigger source.
Command
TRGSOURCE source
Query
TRGSOURCE?
Response
source
Parameter
source
Trigger signal source
[MS269xA]
VID
Video detection (Video)
WIDEVID
Wideband IF detection (Wide IF Video)
EXT
External input (External)
SG
SG Marker
BBIF
Baseband Interface (BBIF)
[MS2830A], [MS2840A]
VID
Video detection (Video)
WIDEVID
Wideband IF detection (Wide IF Video)
EXT
External input (External)
SG
SG Marker
FRAME
Frame period trigger
Details
[MS269xA]
SG Marker trigger can be selected only when the Option 020/120 Vector
Signal Generator is installed.
BBIF trigger cannot be selected only when the Option 040/140 Baseband
Interface Unit is not installed or the software package is Ver.6.00.00 or
later.
[MS2830A], [MS2840A]
SG marker trigger can be selected only when the Option 020/120/021/121
Vector Signal Generator is installed.
Example of Use
To set the trigger signal source to video trigger.
TRGSOURCE VID
TRGSOURCE?
> VID