Anritsu MS2840A - SPUR:PEAK:RES;SPUR:PEAK:RES?

Chapter
４
Native Device Message Details
4-288
Example of Use
To stop the measurement when a “Fail” segment has been found.
SPUR:FST ON
SPUR:FST?
> 1
SPUR:PEAK:RES/SPUR:PEAK:RES?
Spurious Emission Search Resolution
Function
This command sets the spurious search resolution when Result Type is
set to Peaks.
Command
SPUR:PEAK:RES
rel_ampl_1,rel_ampl_2,rel_ampl_3,rel_ampl_4,rel_ampl_5,r
el_ampl_6,rel_ampl_7,rel_ampl_8,rel_ampl_9,rel_ampl_10,r
el_ampl_11,rel_ampl_12,rel_ampl_13,rel_ampl_14,rel_ampl_
15,rel_ampl_16,rel_ampl_17,rel_ampl_18,rel_ampl_19,rel_a
mpl_20
Query
SPUR:PEAK:RES?
Response
rel_ampl_1,rel_ampl_2,rel_ampl_3,rel_ampl_4,rel_ampl_5,r
el_ampl_6,rel_ampl_7,rel_ampl_8,rel_ampl_9,rel_ampl_10,r
el_ampl_11,rel_ampl_12,rel_ampl_13,rel_ampl_14,rel_ampl_
15,rel_ampl_16,rel_ampl_17,rel_ampl_18,rel_ampl_19,rel_a
mpl_20
Value is returned in dB units, without suffix code.
Parameter
rel_ampl_n
Spurious search resolution of Segment n
Range 0.001 to 50.00 dB
Resolution 0.001 dB
Suffix code DB
Example of Use
To set the spurious search resolution.
SPUR:PEAK:RES 6,6,6,6,6,10,10,10,6,6,6,6,6,6,6,6,6,6,6,6
SPUR:PEAK:RES?
>
6.000,6.000,6.000,6.000,6.000,10.000,10.000,10.000,6.000
,6.000,6.000,6.000,6.000,6.000,6.000,6.000,6.000,6.000,6
.000,6.000