Anritsu MS2840A - FMD;FMD?

Chapter
４
Native Device Message Details
4-94
FMD/FMD?
Storage Mode (Trace F)
Function
This command sets the storage mode of Trace F.
Command
FMD mode
Query
FMD?
Response
mode
Parameter
mode
Storage mode
0
Off
1
Max Hold
2
Average
3
Min Hold
6
Linear Average
Details
This command is not available in the following cases:
•
During the Spectrum Emission Mask measurement.
•
During the Spurious Emission measurement.
Example of Use
To set the storage mode of Trace F to Average.
FMD 2
FMD?
> 2