Chapter 2 SCPI Device Message Details
2-610
[:SENSe]:SEMask:BANDwidth[1]:VIDeo:AUTO ON|OFF|1|0
Spectrum Emission Mask Video Bandwidth Auto/Manual
Function
This command enables/disables the automatic video bandwidth (VBW)
setting function when measuring the reference power for Spectrum
Emission Mask measurement.
Command
[:SENSe]:SEMask:BANDwidth[1]:VIDeo:AUTO <switch>
Parameter
<switch>
Automatic video bandwidth setting function
On/Off
ON|1
Enables the automatic video bandwidth setting
function.
OFF|0
Disables the automatic video bandwidth setting
function.
Details
The setting range of this function is limited depending on the settings of
RBW. Refer to the
MS2690A/MS2691A/MS2692A Signal Analyzer
Operation Manual (Spectrum Analyzer Function Operation)
or
MS2830A/MS2840A Signal Analyzer Operation Manual (Spectrum
Analyzer Function Operation)
for details.
Example of Use
To enable the automatic video bandwidth setting function when
measuring the reference power.
SEM:BAND:VID:AUTO ON
To Next Page
Loading...
