Anritsu MS2840A - :CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer; :CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer:NEXT

Chapter 2 SCPI Device Message Detail
2-810
:CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer
Spurious Emission Power Peak Search
Function
This command moves the active marker to the position where the peak
power of the zone width of the active marker becomes maximum in the
measurement band.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer
Related command
This command has the same function as the following command.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:
POWer
:CALCulate:CHPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:
POWer
:CALCulate:OBWidth:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:
POWer
:CALCulate:BPOWer|:TXPower:MARKer[1]|2|3|4|5|6|7|8|9|10:
MAXimum:POWer
:CALCulate:SPURious:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer:NEX
T
Spurious Emission Next Power Peak Search
Function
This command searches for the next largest peak power in the zone
width compared to the total power of the zone width of the active marker
in the measurement band and moves the active marker.
Refer to
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer:NE
XT.
Related command
This command has the same function as the following command.
:CALCulate:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:POWer:NE
XT
:CALCulate:ACPower:MARKer[1]|2|3|4|5|6|7|8|9|10:MAXimum:
POWer:NEXT