Anritsu MS2840A - :CALCulate:LLINe[1]|2|3|4|5|6:DISPlay?; :CALCulate:LLINe[1]|2|3|4|5|6:STATe OFF|ON|0|1

2.6 Trace
2-199
2
SCPI Device Message Details
:CALCulate:LLINe[1]|2|3|4|5|6:DISPlay?
Limit Display Query
Function
This command queries the Limit Display settings.
Query
:CALCulate:LLINe[1]|2|3|4|5|6:DISPlay?
Response
<switch>
Parameter
<switch>
Limit Display On/Off
0
Limit Display Off
1
Limit Display On
Example of Use
To query the Limit Display setting.
CALC:LLIN:DISP?
> 0
:CALCulate:LLINe[1]|2|3|4|5|6:STATe OFF|ON|0|1
Limit Test
Function
This command selects whether to judge Pass/Fail.
Command
:CALCulate:LLINe[1]|2|3|4|5|6:STATe <switch>
Parameter
<switch>
Pass/Fail
OFF|0
Does not judge Pass/Fail (Default)
ON|1
Judges Pass/Fail
Example of Use
To judge Pass/Fail.
CALC:LLIN:STAT 1