Anritsu MS2840A - :CALCulate:SGControl:POWer?

2.16 Internal Signal Generator Control function
2-853
2
SCPI Device Message Details
:CALCulate:SGControl:POWer?
Internal Signal Generator Control SG Output Level Query
Function
This command queries the SG output level.
Query
:CALCulate:SGControl:POWer?
Response
<numeric_value>
Parameter
<numeric_value>
SG output level
Range –40.00 to +20.00 dBm (Start Frequency > 25 MHz) (*)
–40.00 to +2.00 dBm (Start Frequency ≤ 25 MHz) (*)
–136.00 to +15.00 dBm (Start Frequency > 25 MHz) (**)
–136.00 to –3.00 dBm (Start Frequency ≤ 25 MHz) (**)
Resolution 0.01 dB
Suffix code None, Value is returned in dBm units.
(*) without Option 022/122
(**) with Option 022/122
Details
This command is available only for MS2830A.
Example of Use
To query the SG output level.
CALC:SGC:POW?
> -30.00