Anritsu MS2840A - [:SENSe]:SWEep:EGATe:VIEW:BANDwidth[:RESolution]:AUTO ON|OFF|1|0

2.7 Sweep/Trigger/Gate
2-303
2
SCPI Device Message Details
Example of Use
To query the sweep time.
SWE:EGAT:TIME?
> 0.100000
[:SENSe]:SWEep:EGATe:VIEW:BANDwidth[:RESolution]:AUTO ON|OFF|1|0
Gate View Resolution Bandwidth Auto/Manual
Function
This command automatically sets the resolution bandwidth (RBW) for
Gate View.
This parameter and the one for automatically setting the RBW for time
axis measurement reference the same value.
Command
[:SENSe]:SWEep:EGATe:VIEW:BANDwidth[:RESolution]:AUTO
<switch>
Parameter
<switch>
Automatic setting
0|OFF
Disables the automatic setting.
1|ON
Enables the automatic setting (Default).
Details
This command is not available when Gate View is set to Off.
Example of Use
To enable the automatic setting of the RBW for Gate View.
SWE:EGAT:VIEW:BAND:AUTO ON