Anritsu MS2840A - SEM:OFFS:LIST:BAND:AUTO;SEM:OFFS:LIST:BAND:AUTO?

Chapter
４
Native Device Message Details
4-229
4
Native Device Message Details
Example of Use
To set the resolution bandwidth of the offset.
SEM:OFFS:LIST:BAND
30KHZ,30KHZ,30KHZ,1MHZ,1MHZ,1MHZ,30KHZ,30KHZ,30KHZ,1MHZ,
1MHZ,1MHZ
SEM:OFFS:LIST:BAND?
>
30000,30000,30000,1000000,1000000,1000000,30000,30000,30
000,1000000,1000000,1000000
SEM:OFFS:LIST:BAND:AUTO/SEM:OFFS:LIST:BAND:AUTO?
Spectrum Emission Mask Offset Resolution Bandwidth Auto/Manual
Function
This command sets the resolution bandwidth (RBW) of the offset for
Spectrum Emission Mask measurement automatically.
Command
SEM:OFFS:LIST:BAND:AUTO
switch_1_com[,switch_2_com[,switch_3_com[,switch_4_com[,
switch_5_com[,switch_6_com[,switch_7_com[,switch_8_com[,
switch_9_com[,switch_10_com[,switch_11_com[,switch_12_co
m]]]]]]]]]]]
Query
SEM:OFFS:LIST:BAND:AUTO?
Response
switch_1_res,switch_2_res,switch_3_res,switch_4_res,swit
ch_5_res,switch_6_res,switch_7_res,switch_8_res,switch_9
_res,switch_10_res,switch_11_res,switch_12_res
Parameter
switch_n_com
Automatic setting function of RBW in measuring
Offset-n
ON|1
Sets the automatic setting function to On.
OFF|0
Sets the automatic setting function to Off.
switch_n_res
Automatic setting function of RBW in measuring
Offset-n
1
Automatic setting function is On.
0
Automatic setting function is Off.