Chapter 2 SCPI Device Message Details
2-286
Details
This command is not available for MS269x Series.
The Trigger (On/Off) function is automatically set to On when this
function is set to On.
This function cannot be set in the case of video trigger.
Example of Use
To set the trigger input disable time setting to On.
TRIG:HOLD:STAT ON
:TRIGger[:SEQuence]:HOLDoff:STATe?
Trigger Hold On/Off Query
Function
This command queries the on/off setting of the function to disable trigger
input for a set time, from the first trigger input until the next trigger
input.
Query
:TRIGger[:SEQuence]:HOLDoff:STATe?
Response
<switch>
Parameter
<switch>
Trigger Hold On/Off
1
Trigger Hold is On.
0
Trigger Hold is Off.
Details
This command is not available for MS269x Series.
Example of Use
To query the trigger input disable time setting.
TRIG:HOLD:STAT?
> 1
To Next Page
Loading...
