Anritsu MS2840A - SPUR:POW:GAIN;SPUR:POW:GAIN?

Chapter
４
Native Device Message Details
4-290
SPUR:POW:GAIN/SPUR:POW:GAIN?
Spurious Emission Preamp On/Off
Function
This command sets the pre-amp of each segment to On/Off.
Command
SPUR:POW:GAIN
switch_1_com,switch_2_com,switch_3_com,switch_4_com,swit
ch_5_com,switch_6_com,switch_7_com,switch_8_com,switch_9
_com,switch_10_com,switch_11_com,switch_12_com,switch_13
_com,switch_14_com,switch_15_com,switch_16_com,switch_17
_com,switch_18_com,switch_19_com,switch_20_com
Query
SPUR:POW:GAIN?
Response
switch_1_res,switch_2_res,switch_3_res,switch_4_res,swit
ch_5_res,switch_6_res,switch_7_res,switch_8_res,switch_9
_res,switch_10_res,switch_11_res,switch_12_res,switch_13
_res,switch_14_res,switch_15_res,switch_16_res,switch_17
_res,switch_18_res,switch_19_res,switch_20_res
Parameter
switch_n_res
Pre-amp On/Off
ON|1
Pre-amp is set to On.
OFF|0
Pre-amp is set to Off.
Default Off
switch_n_res
Pre-amp On/Off
1
Pre-amp is set to On.
0
Pre-amp is set to Off.
Details
[MS269xA]
This command is turned off and thus invalid when Option 008/108 6 GHz
Preamplifer is NOT installed.
[MS2830A]
This command is turned off and thus invalid when Option
008/108/068/168 Preamplifer is NOT installed.
[MS2840A]
This command is turned off and thus invalid when Option
008/108/068/168/069/169 Preamplifer is NOT installed.