Chapter
４
Native Device Message Details
4-181
4
Native Device Message Details
MZW/MZW?
Zone Marker Width (Specified by Point)
Function
This command sets the zone marker width using the displayed points.
Command
MZW point,marker
Query
MZW? marker
Response
point
Parameter
point
Zone marker width
Range 1 to 1001, 2001, 5001, 10001, 30001 (MS269xA
Only) points
marker
Marker type
1
Marker 1
2
Marker 2
3
Marker 3
4
Marker 4
5
Marker 5
6
Marker 6
7
Marker 7
8
Marker 8
9
Marker 9
10
Marker 10
When omitted: Active marker
Details
This command is not available during the Spurious Emission
measurement and when Displayed Segment Mode is set to Auto.
This command is disabled during the Spectrum Emission Mask
measurement.
Example of Use
To set the zone marker width to 501 points.
MZW 501
MZW?
> 501
To Next Page
Loading...
