Chapter
４
Native Device Message Details
4-318
SVCSVWAVE
Save Wave Data
Function
This command saves waveform data into a CSV file.
Command
SVCSVWAVE file,device
Parameter
file
Name of file to be saved
Character string within 32 characters enclosed
by double quotes (" ") or single quotes (' ').
(excluding extension)
The following characters cannot be used.
\ / : * ? “ ” ‘ ’ < > |
File name is automatically set to “WaveData
date consequential number.csv” when omitted.
device
Drive name
A,B,D,E,F,...
D
drive is used when omitted.
Details
When a file name is omitted, 0 to 99 are added to files. If all of the
numbers is already used, no more files can be saved.
Files is saved in the following directory of the specified drive.
\Anritsu Corporation\Signal Analyzer\User Data
\Trace Data\Spectrum Analyzer
Up to 1000 files can be saved in the folder.
This command is not available when Spectrum Emission Mask is set to
On and when Gate View is set to Off.
Example of Use
To save a waveform data file “trace” into drive E.
SVCSVWAVE "trace",e
To Next Page
Loading...
