Anritsu MS2840A - CALC:MARK:MAX:POW:NEXT

Chapter
４
Native Device Message Details
4-44
CALC:MARK:MAX:POW:NEXT
Next Power Peak Search
Function
This command searches for the next largest peak power in the zone
width compared to the total power of the zone width of the active marker
in the measurement band and moves the active marker.
Command
CALC:MARK:MAX:POW:NEXT n
Parameter
n
Marker Number
1
Specifies marker 1
2
Specifies marker 2
3
Specifies marker 3
4
Specifies marker 4
5
Specifies marker 5
6
Specifies marker 6
7
Specifies marker 7
8
Specifies marker 8
9
Specifies marker 9
10
Specifies marker 10
Details
This cannot be executed under the following conditions:
•
In Time Domain
•
When Scale Mode is Linear
•
When active trace is Blank
•
When Spurious Emission measurement is On and Displayed Segment
Mode is Auto
•
When Spectrum Emission Mask measurement is On
Example of Use
To move marker 1 to position of zone width with next largest peak power.
CALC:MARK:MAX:POW:NEXT 1