Anritsu MS2840A - :MMEMory:STORe:EVENt ON|OFF|1|0

Chapter 2 SCPI Device Message Detail
2-1008
:MMEMory:STORe:EVENt ON|OFF|1|0
Event Mode
Function
This command sets whether to turn on or off the Save on Event function.
Command
:MMEMory:STORe:EVENt <Switch>
Parameter
<switch>
Save on Event function
ON|1
Sets the Save on Event function to ON.
OFF|0
Sets the Save on Event function to OFF.
(Default)
Details
All traces are subject to the save operation by the Save on Event
function.
Example of Use
To set the Save on Event function to On.
:MMEM:STOR:EVEN ON