Chapter 2 SCPI Device Message Details
2-364
Example of Use
To set the offset channel bandwidth to 3.84 MHz.
ACP:OFFS:BAND 3.84MHZ
Related command
This command has the same function as the following command.
:CALCulate:ACPower:OFFSet[1]:BANDwidth[:INTegration]
:CALCulate:ACPower:OFFSet[1]:BANDwidth[:INTegration] <freq>
Adjacent Channel Power Offset Channel Bandwidth
Function
This command sets the Offset Channel bandwidth for Adjacent Channel
Power measurement.
Refer to
[:SENSe]:ACPower:OFFSet[1]:BANDwidth[:INTegration].
Related command
This command has the same function as the following command.
[:SENSe]:ACPower:OFFSet[1]:BANDwidth[:INTegration]
[:SENSe]:ACPower:OFFSet[1]:BANDwidth[:INTegration]?
Adjacent Channel Power Offset Channel Bandwidth Query
Function
This command queries the Offset Channel bandwidth for Adjacent
Channel Power measurement.
Query
[:SENSe]:ACPower:OFFSet[1]:BANDwidth[:INTegration]?
Response
<freq>
Parameter
<freq>
Offset Channel bandwidth
Range 1 to 1000000000 Hz
Resolution 1 Hz
Suffix code None. Value is returned in Hz units.
To Next Page
Loading...
