Anritsu MS2840A - :DISPlay:WINDow[1]:TRACe:Y[:SCALe]:RLEVel:OFFSet:STATe ON|OFF|1|0

Chapter 2 SCPI Device Message Details
2-72
Example of Use
To query the reference level offset.
DISP:WIND:TRAC:Y:RLEV:OFFS?
> 10.00
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:RLEVel:OFFSet:STATe ON|OFF|1|0
Reference Level Offset Mode
Function
This command enables/disables the reference level offset function.
Command
:DISPlay:WINDow[1]:TRACe:Y[:SCALe]:RLEVel:OFFSet:STATe
<switch>
Parameter
<switch>
Reference level offset function On/Off
ON|1
Enables the reference level offset function.
OFF|0
Disables the reference level offset function
(Default value).
Example of Use
To enable the reference level offset function.
DISP:WIND:TRAC:Y:RLEV:OFFS:STAT ON